1230 Keyboard Bezel Assembly - Lenovo 100w Gen 4 Hardware Maintenance Manual

Step Screw (quantity)
4
M 2.5 × 3.5 mm, flat-head, nylon-coated (6)
When installing: Ensure that the connectors are attached firmly.
Attention: When you route the cables, ensure that they are not subject to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.

1230 Keyboard bezel assembly

For access, remove these FRUs:
• "1010 Keyboard " on page 49
• "1020 Base cover assembly" on page 52
• "1030 M.2 solid-state drive and thermal pad" on page 55
Color Torque
Black 0.294 Nm
(3.0 kgf-cm)
.
Chapter 5 Removing or replacing a FRU
73