Typical application setup
Logic input setpoints
The logic input setpoints include the logic input identification, logic input asserted logic, and
logic input functionality. To set logic inputs by means of the EnerVista 750/760 Setup
software, select the Setpoints > Logic Inputs menu item. The setpoints are shown as sub-
pages of the following tree:
Protection setpoints
Refer to the Application example on page 33 for details on how to set the 750/760 Feeder
Mangement Relay for a typical overcurrent protection of a distribution feeder.
The EnerVista 750/760 Setup software can be used to set the overcurrent protection
elements. For example, select the Setpoints > Protection > Phase Currents menu item. The
setpoints will appear as tabs in the corresponding window:
10
750/760 Quick Reference Guide