Siemens FDCI183 Product Manual

FDCI183 Transponder
Product Manual
Characteristic
Application
From a functional perspective, we distinguish between the primary side and the secondary side of the transponder.
The primary side is the connection to the FD18-BUS. The secondary side is the connection to the collective
detection line.
Compatible detector list
Type
HI520/OP520
DO1101A-EX/DT1101A-EX
DF1101-EX
FDL241-9-CN/DF1191/DF1192
FDO181C/FDT181C
Communication
The communication with the control panel is performed via the FD18-BUS. The configuration is performed on
the control unit or commissioning tool.
Power Supply
Power supply of the primary side (FD18-BUS) is always ensured via the detector line FD18-BUS. Power
supply of the secondary side must always be ensured via an external 24VDC supply unit. The primary and
the secondary side are galvanically isolated.
Operating modes
The transponder can be in either of the following operating modes:
Fulfill Chinese Standard of GB16806-2006 "Interlocking Control System";
1 monitored inputs as collective detector connection;
LED display of alarm and fault status;
External 24VDC power supply;
Microprocessor-controlled signal evaluation;
Earth fault monitoring;
With the Zener diode barrier, it is also possible to connect intrinsically safe detectors;
Applicable in dry, dusty and humid areas in protection box.
Max. detector per line
32
25
5
1
32