Cleaning The Filter - Taurus SECADOR STUDIO 2500 Instructions For Use Manual

Downloaded by: pd-oliana on 11-04-2023 16:15 CEST
to the desired position.
ACCESSORIES:
Air concentrator accessory (A):
This accessory is used to concentrate the air
flow into one specific area.
Attach the unit to the product by pressing until
you hear a click (Fig.1).
DIFFUSER ACCESSORY (B):
This accessory is used to harmonize the air
flow into one specific area.
Attach the unit to the product by pressing until
you hear a click.
SAFETY THERMAL PROTECTOR:
The appliance has a safety device, which pro-
tects the appliance from overheating.
When the appliance switches itself on and off
repeatedly, for reasons other than the ther-
mostat control, check to ensure that there are
no obstacles that impede correct air entry or
expulsion.
If the appliance turns itself off and does not
switch itself on again, disconnect it from the
mains supply, and wait for approximately 15
minutes before reconnecting. If the machine
does not start again seek authorised technical
assistance.
CLEANING
Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
Do not use solvents, or products with an acid
or base pH such as bleach, or abrasive prod-
ucts, for cleaning the appliance.
Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
Never submerge the appliance in water or any
other liquid or place it under running water.
If the appliance is not in good condition of
cleanliness, its surface may degrade and in-
exorably affect the duration of the appliance's
useful life and could become unsafe to use.

CLEANING THE FILTER:

The air inlet filter (C) should be cleaned period-
ically for proper operation of the device.
Check the filler periodically, before connecting
the appliance to the mains, and remove any re-
maining hair or dirt from it using a damp cloth.