Table of Contents
Advertisement
Add rinse aid
When the rinse aid needs filling up, the above symbol lights on the display.
Lift up to open
Press to close
1. Open the rinse aid compartment lid.
2. Carefully fill up with rinse aid to the level marked MAX.
3. Wipe up any spilled rinse aid around the compartment.
4. Close the lid firmly.
After filling up, it may take a while before the symbol goes out.
Add salt
When the salt needs filling up, the above symbol lights on the display.
1. Remove the salt compartment lid by turning it counterclockwise.
2. Place the funnel supplied with the dishwasher in the salt compartment top-up hole. (Water is
only needed the first time.)
3. Add enough salt to fill the salt compartment (max. 750 gram (26 oz)). Use special dishwasher
salt.
4. Wipe up any excess salt so that the lid can be screwed on firmly.
After filling up, it may take a while before the symbol goes out.
WARNING!
In order to avoid rust stains, a dishwashing program must be started immediately after adding
salt.
Never pour dishwasher detergent into the salt compartment. This destroys the water softener!
Care and maintenance instructions
35
Advertisement
Table of Contents
