Environmental Conditions; Specification - Victor Evolution SEHT60SW Operating Manual

The liability of Victor Manufacturing Ltd and its appointed engineers are limited to the cost of repairs (parts and labour only) of
the unit under warranty. Loss of food or other damages caused by faulty goods are not covered by the warranty.
No fault found warranty calls and installation errors are not covered under Victor Manufacturing Ltd warranty and will result in a
charge being made for the call-out and on-site labour for our appointed engineer. The Victor Manufacturing Ltd warranty does
not cover the replacement of used consumables, or parts that require period adjustment or lubrication, unless the part is faulty.
You must have evidence that routine maintenance has been carried out by a qualified engineer in accordance with the
instruction manual. This is of particular importance with refrigerated and gas fuelled appliances. Work made necessary by lack
of routine maintenance or cleaning is not covered by this warranty and will be chargeable.
Victor Manufacturing Ltd parts and labour warranty is valid for the United Kingdom Mainland only. (Parts only all areas outside
the United Kingdom Mainland.)
Some parts are automatically not covered by the Victor Manufacturing Ltd warranty (e.g. panels, glass, lamps, shelves, etc.)
Many surface finishes including paint and plastic coated steel can be scratched and damaged if not properly cared for; such
damage is not covered by the Victor Manufacturing Ltd warranty.

6. ENVIRONMENTAL CONDITIONS

This appliance contains electrical components and should be used and stored indoors only under the conditions listed in the table
below.
Environmental
Temperature (Storage)
Relative Humidity (Storage)
Temperature (Operation)
Relative Humidity (Operation)
Altitude
Electrical Supply Fluctuation

7. SPECIFICATION

This appliance contains electrical components and should be used and stored indoors only under the conditions listed in the table
below.
The Model Number
Model Code
4 letter model code
Model Code:
SEHT - Square glass,
Evolution, Heated, Tall
Appliance Electrical Connection and Fuse Specification
Model:
SEHT60...
SEHT90...
Appliance Specification
Model: Unit Weight
(Unloaded)
SEHT60SW 195Kg
SEHT90SW 240Kg
*Max power and current at upper supply voltage 240V.
-5°C - 35°C
Max. 80% up to 31°C decreasing linearly to 50% at 40°C
16°C to 25°C
60% Max (at 25°C)
Not exceeding 2000m
230V AC +10%, - 6%
Model size
2 or 3 digit size code
Model Size:
60 - 600mm width
90 - 900mm width
Fuse/Protection
Method
Fuse
MCB
Max Load
(Base)
20Kg
20Kg
Type code
1 or 2 letter type code
Type Code:
S - Self Service (Open front)
Location
Plug
Control Panel
Max Load Supply Voltage
(Each shelf ) (Vac)
12Kg 220-240/50Hz
12Kg 220-240/50Hz
Rear/Door type
1 or 2 letter type code
Rear/Door Code:
W - Wall Style (Controls to front)
Type
13A (BS1362)
16A (Type B)
Max Current
12.5A*
15.5A*
Supply/Plug
13A (3 pin)
16A (Commando)
Max Power
3kW
3.8kW