Control Boxes - MULTIQUIP ST3050D Operation And Parts Manual

CONTROL BOXES

Control boxes (Figure 3) are available for remote control
and thermal shut-down capability for the submersible pump.
These water resistant control boxes provide electronic
overload protection, watertight housing and glands to
prevent water from leaking into the box, and a float switch
interface.
There are various control box models to choose from,
reference Table 2 for the model that meets your pumping
requirements.
Contact Multiquip sales department to order control boxes
as listed in Table 2.
NOTICE
ALWAYS have a qualified licensed electrician perform
the installation of the control box.
Model No.
CB200
MCP102
MCP104
PAGE 12 —ST3050D SUBMERSIBLE PUMP • OPERATION AND PARTS MANUAL — REV. #4 (01/11/23)
Table 2. Control Box Specifications
UL/CSA
Voltage Type
230/460 VAC
Three-Phase
230 VAC
Three-Phase
460 VAC
Three-Phase
CB200 CB200
AC POWER
INPUT
Figure 3. Electrical Control Box (CB200)
Thermal
Overload
Listed
Protection
YES YES
YES YES
YES YES
CONTROL BOXES
CONTROL
BOX
CAUTION! CAUTION!
HIGH HIGH
VOLTAGE! VOLTAGE!
OFF
MANUAL AUTO
ON
RESET
TO PUMP
FLOAT
SWITCH
INPUT
Float
Switch
Capability
YES
NO
NO