Kia CARNIVAL 2023 Manual page 179

Features of your vehicle
Auto reverse user settings
If you cannot secure enough visibility
with the angles provided as factory
default conditions, you can readjust and
store the angles of outside rearview mir-
rors.
The factory default angles of the right
and left rearview mirrors might be set
differently to improve visibility.
1. Set the shift dial to P (Parking). Make
sure that the vehicle is stopped and
the mirrors are not working.
2. Position the lever to L (left) or R (right)
depending on the mirror that you
want to adjust.
3. Step on the brake pedal and turn the
shift dial to R (Reverse).
4. When the downward movement of
the rearview mirror is finished, adjust
the mirror to the desired angle by
pressing the switches, ▼, ▲, ◀, ▶.
5. If you change the shift dial to a posi-
tion other than R (Reverse), or change
the rearview mirror selector lever to
the neutral position, and the auto-
matic return of the mirror is finished,
the adjusted angle will be automati-
cally saved.
6. You can adjust the rearview mirror on
the other side by following the same
procedures (1-5).
How to initialize auto reverse
user settings
If you want to change the automatic
control function of rearview mirrors to
factory-default conditions, follow the
steps below.
1. Position the shift dial to P (Park).
Make sure that the vehicle is stopped
and the mirror is not working.
2. Choose the mirror to be adjusted by
positioning the lever to L (left) or R
(right).
3. Step on the brake pedal and turn the
shift dial to R (Reverse).
4. When the downward movement of
the rearview mirror is finished, press
the switch ▲ to locate the mirror in
the position higher than before (P, N
or D).
(Adjust the mirror in the higher posi-
tion compared to its position in the
driving mode)
5. It is initialized when the shift dial is
changed to a position other than R
(Reverse), or the rearview mirror
selector lever is changed to the neu-
tral position. (Initialized position will be
applied from next operation)
6. You can initialize settings for the mir-
ror on the other side by following the
same procedures (1-5).
CAUTION
We recommend following the proce-
dures in an orderly manner to change or
initialize the auto reversing user settings.
If you move to the next step before com-
pleting the previous one, the changed
angle may not be changed or initializa-
tion may not work properly
Mirrors
4
4 69