Safety Warnings - Graco C Series Instructions Manual

FOR PROFESSIONAL USE ONLY. OBSERVE ALL WARNINGS
Read and understand all instruction manuals before operating equipment.
General Safety
Any misuse of the equipment or accessories, such as
overpressurizing, modifying parts, using incompatible
chemicals and fluids, or using worn or damaged parts,
can cause them to rupture and result in serious bodily in-
jury, such as splashing fluid in the eyes or on the skin, or
in fire, explosion or property damage.
ALWAYS relieve all fluid pressure in the system before
removing or servicing the regulator. Close the fluid shut-
off valve and relieve fluid pressure downstream of the
regulator.
NEVER try to stop or deflect leaks with your hand or
body.
NEVER alter or modify any part of this equipment; doing
so could cause it to malfunction.
CHECK the regulator weekly and repair or replace worn
or damaged parts immediately.

SAFETY WARNINGS

Read and follow the fluid and solvent manufacturer's lit-
erature regarding the use of protective eyewear, gloves,
clothing, respirator and other equipment.
Fluid Compatibility
BE SURE all fluids and solvents used are chemically
compatible with the "Wetted Parts" shown in the TECH-
NICAL DATA on the back cover and with the wetted parts
in all other system components. Always read the fluid
and solvent manufacturer's literature before using the
fluid/solvent in this regulator.
System Pressure
Use this regulator only in low pressure, air spray sys-
tems. NEVER exceed the 250 psi (18 bar) MAXIMUM
INLET PRESSURE of this regulator. DO NOT exceed
the maximum working pressure of any component or
accessory used in your system.