AEG AIRDRY 3000 User Manual page 12

How to deactivate the rinse aid empty
notification
Make sure the appliance is in user mode.
1. Press the programme button immediately.
The indicator starts to flash.
2. Wait until the indicator
flash and the remaining programme
indicators are off.
The indicator shows the current setting:
• is on = Rinse aid empty
notification is on.
• is off = Rinse aid empty
notification is off.
3. Press the programme button to change
the setting.
4. Press the on/off button to confirm the
setting.
7.4 Acoustic signals
Acoustic signals sound when a malfunction of
the appliance occurs. It is not possible to
deactivate these acoustic signals.
There is also an acoustic signal that sounds
when the programme is completed. By
default this acoustic signal is deactivated but
it is possible to activate it.
How to activate the acoustic signal for
the end of the programme
Make sure the appliance is in user mode.
1. Press the programme button twice.
The indicator starts to flash.
2. Wait until the indicator
flash and the remaining programme
indicators are off.
The indicator shows the current setting:
• is off = The acoustic signal is off.
• is on = The acoustic signal is on.
3. Press the programme button to change
the setting.
4. Press the on/off button to confirm the
setting.
12 ENGLISH
7.5 AirDry
AirDry improves the drying results with less
energy consumption. During the drying
phase, the door opens automatically and
remains ajar.
continues to
AirDry is automatically activated with all
programmes excluding
The duration of the drying phase and the door
opening time vary depending on the selected
programme and options.
How to deactivate the AirDry
continues to
Make sure the appliance is in user mode.
1. Press the programme button three times.
The indicator
2. Wait until the indicator
The indicator
3. Press the programme button to change
CAUTION!
Do not try to close the appliance door
within 2 minutes after automatic opening.
This can cause damage to the appliance.
CAUTION!
If children have access to the appliance,
it is advised to deactivate AirDry as
opening the door may pose a danger.
starts to flash.
flash and the remaining programme
indicators are off.
shows the current setting:
• is off = AirDry is off.
• is on = AirDry is on.
the setting.
(if applicable).
continues to