Table of Contents
Advertisement
Create BACKUP Disks for Reinstallation
When [You do not need to make "BACKUP DISK"] is displayed (procedure
there is no need to create a BACKUP DISK. If this message is not displayed, create
backup disks for reinstallation. To create backup disks, the floppy disk drive and format-
ted 2HD floppy disks are needed.
Turn your computer off.
1
2
Set the floppy disk drive in the multimedia pocket. (
Turn your computer on.
3
Log on as the administrator.
Make sure a disk is not in the write-protected state and
4
set it.
Windows 2000
5
Select [Start] - [Programs] - [Panasonic] - [Create
Backup Disk] and follow the on-screen instructions.
Windows XP
Select [Start] - [All Programs] - [Panasonic] - [Create
Backup Disk] and follow the on-screen instructions.
Place a label identifying the contents on each disk.
6
Names of created BACKUP DISK
FIRSTAID FD (When the display for creating the UPDATE FD is shown, create the
disk by following the on-screen instructions.)
CAUTION
Store the floppy disks in a safe place. They will enable you to return your computer
to factory default settings should any problems occur.
When creating backup disks and the message [Insufficient files to copy] is dis-
played, select [OK] and then contact Panasonic Technical Support.
While the MP indicator (
your computer or enter either the standby or hibernation mode (
Hibernation Functions").
When creating backup disks, do not run any other application program.
Be sure to create the backup disk.
If a backup disk is not created, it will be impossible to return the computer to its
original state. In this case, contact Panasonic Technical Support.
) is on, do not remove the floppy disk, power down
below),
5
"Multimedia Pocket")
Eject Button
Label-side up
Insert the shutter-side
headfirst.
"Standby/
13
Advertisement
Table of Contents
