Windows Update - Panasonic Toughbook CF-51LCMDDBM Operating Instructions Manual

Useful Information
If the message "Your computer might be at risk" is displayed
The Pop-up Blocker
Computer Viruses

Windows Update

When Using Peripheral Devices
20
Read the message, select
settings.
This message, which the Windows Security Center (
security-related settings regularly, will be displayed until the settings are made more
properly.
NOTE
This message does not indicate an error. You can use the computer while the
message is displayed. However, in order to operate the computer more safely,
we recommend making the appropriate measures to reduce damage from virus
and other attacks, thus avoiding the appearance of this message.
In Windows XP, security functions have been strengthened with regard to Web con-
tents.
One of these is the "Pop-up Blocker," which may prevent some Web pages from being
displayed.
Users are advised to purchase the latest versions of virus protection software
and use them regularly.
We recommend you run the software:
When booting your computer.
After receiving data.
We recommend that you check data received on disks or from external sources, such
as data downloaded from the Internet, e-mail, etc. (For compressed files, uncompress
them before running a check).
For Data Execution Prevention (DEP), you can make one of the settings in the following
menu.
[start] - [Control Panel] - [Performance and Maintenance] - [System] - [Advanced] -
[Settings] (in [Performance]) - [Data Execution Prevention]
For more information, refer to Windows help.
You can use the latest patches and service packs for Windows with the following
menus.
Do not apply "Driver Updates" even if a message to update a driver appears. If a
driver update is required, contact Panasonic Technical Support. (
[start] - [All Programs] - [Windows Update]
Pay strict attention to the following points to avoid damage to the computer, peripheral
devices, cables, etc. Also, in addition to following this manual and the Reference Man-
ual, carefully read the instruction manuals for the peripheral devices being used.
Use only peripheral devices that conform to the computer's specifications.
Connect the devices properly, paying close attention to the condition and position of
the connectors.
If a connection cannot be made easily, do not apply undue force; check once more
to confirm the condition and position of the connector (alignment of pins, etc.) .
If the connector has holding screws, fasten the screws firmly.
(red icon) on the taskbar, and make the appropriate
page 19) displays to confirm the
page 35)