Connecting Peripherals - Panasonic Toughbook CF-19AHJAX1M Reference Manual

Troubleshooting (Advanced)

Connecting Peripherals

An error occurs while installing the
driver.
A peripheral device does not work.
The connected mouse does not work.
When you install a driver of card or peripheral device, make sure that the driver
is compatible with the operating system. If it is not compatible, malfunction may
occur. For information about the driver, contact the manufacturer of the periph-
eral device.
Install the driver.
Contact the manufacturer of the device.
When operation resumes from sleep
mouse, modem and cards may not function properly. In this case, restart the
computer or reinitialize the device.
When or is displayed in the Device Manager, remove and insert the
device. If the problem persists, restart the computer.
The computer may not recognize the connection/removal of some devices, or
may not operate normally with some devices.
A
Click (Start) - [Computer] - [System properties] - [Device Manager].
A standard user needs to enter an administrator password.
Click [start] - [Control Panel] - [Performance and Maintenance] - [System] -
[Hardware] - [Device Manager].
Select the applied device, and remove the check mark for [Allow the
B
computer to turn off this device to save power] in [Power Management].
(This item may be unavailable for some types of devices.)
In the case that a USB device does not work, remove the USB device and con-
nect it again or connect the USB device to another port.
Check the mouse connection.
Install the driver compatible with the connected mouse.
If the mouse does not work even after installing the driver, set [Touch Pad] to
[Disabled] in the [Main] menu of the Setup Utility (
136
*5
or hibernation, devices such as a
page 105).