Panasonic CF-53AUGZK1M Operating Instructions Manual page 14

First-time Operation
14
4 Setup Windows.
A Follow the on-screen instructions.
The computer restarts several times. Do not touch the keyboard or touch pad,
and wait until the drive indicator
After the computer is turned on, the screen remains black or unchanged for a
while, but this is not a malfunction. Wait for a moment until the Windows
setup screen appears.
During setup of Windows, use the touch pad and clicking to move the cursor
and to click an item.
Setup of Windows will take approximately 20 minutes.
Go to the next step, confirming each message on the display.
"Join a wireless network" screen may not appear.
You can set the Wireless Network after the setup of Windows is complete.
CAUTION
Wait until the drive indicator
You can change the user name, password, image and security setting after setup of Windows.
Do not use the following words for user name: CON, PRN, AUX, CLOCK$, NUL,
COM1 to COM9, LPT1 to LPT9, @. In particular, if you create a user name
(account name) that includes the "@" mark, a password will be requested at the
log-on screen, even if no password has been set. If you try to log on without enter-
ing a password, "The user name or password is incorrect." may be displayed and
you will not be able to log on to Windows (
You cannot choose the following words for user name and password: CON,
PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9.
When you set date/time/time zone and click [Next], the screen may not go to the
next step for a few minutes. Do not touch the keyboard or touch pad, and wait
until the screen changes.
If "An unexpected error has occurred ..." (or a similar message) is displayed,
click [OK]. This is not a malfunction.
5 <Only for model with touchscreen>
Perform the touchscreen calibration.
Before performing the calibration, close Tablet PC Input Panel.
NOTE
At first, log on to Windows as an administrator and perform this calibration.
A Click (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Setting].
B Click [Calibrate].
C Using the stylus, touch each of the "+" target marks one by one, and then
click [Yes].
D Click [OK].
NOTE
Perform the following calibration for each user.
A Click (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Setting].
B Click [Calibrate].
C Using the stylus, touch each of the "+" target marks one by one, and then
click [Yes].
D Click [OK].
Perform the calibration for the orientation to be used.
A Click [start] - [All Programs] - [Fujitsu Touch Panel (USB)] - [Touch Screen Calibration Utility].
B Using the stylus, touch each of the "+" target marks one by one and then
press Enter.
C Press Enter.
has turned off.
has turned off.
page 23).