Starting The Scanner Applications Automatically; Setting The Event - Panasonic Camescope KV-S1020C Operating Instructions Manual

Starting the Scanner Applications Automatically

The scanner application can be configured to start automatically when pressing the Start/Stop button, and/or placing
documents on the feed tray. To accomplish this, follow the steps below.

Setting the event

1
Click [Start], and then click [Control Panel] - [Printers and Other Hardware].
• For Windows 2000, click [Start], and then click [Setting] - [Control Panel].
2
Select your scanner in the [Scanners and Cameras], and then display the scanner
property dialog box by right clicking on the scanner icon.
• For Windows 2000, select your scanner in the [Scanners and Cameras Properties], and then display the
scanner property dialog box by clicking [Properties] button.
3
Click the [Events] tab.
4
Select an event in the [Scanner events] list. The selected event activates a scanner
application.
The following events can be selected.
Feeder Loaded An event occurs when placing documents on the feed tray.
Start Button *
* If the unit goes into sleep mode, you must press the Start button twice.
18
An event occurs when pressing the Start/Stop button of the scanner.