Freestyle GILGO Manual

GILGO
FEATURES:
• 10 LAP MEMORY CHRONO-
GRAPHS
• TIME/DAY/DATE
• COUNTDOWN TIMER
• DUAL ALARM
• NIGHT VISION™ BACKLIGHT
DISPLAY
• STAINLESS STELL BEZEL
• DURABLE POLYURETHANE
STRAP
• 100 METERS H2O
KEY TO SYMBOLS:
S4
S3
S1= Start / Stop button
S2= Lap/ Reset button.
S3= Mode button.
S4= Light button.
1. HOW TO RESET THE WATCH.
Hold down the S3, S1 and S2
buttons simultaneously for two
seconds. The LCD will light up
briefly and factory setting will be
adopted. Thisprocedure is useful
when you want to erase all cur-
rent settings.
2. DISPLAY MODES.
The watch has eight major
display modes: NORMAL TIME,
TIME 2, ALARM 1, ALARM 2,
CHRONO, RECALL, PACER and
TIMER. To change from one
display mode to another, press
the S3 button once.
3. HOW TO USE THE NIGHT
VISION™ BACK LIGHT
The watch is equipped with a
NIGHT VISION™ backlight which
can be activated by pressing the
S4 button. The EL backlight will
light up for three seconds
The watch is equipped with a
night light function to further
facilitate time reading in the dark.
To activate it, press and hold the
S4 button for two seconds in any
mode. The NIGHT LIGHT icon will
show up. Once activated backlight
will come on by pressing any
button.
To turn off the night light func-
tion, press and hold the S4
button. The NIGHT LIGHT icon
will disappear. The night light
function will also be deactivated
automatically after being idle for
three hours.
S1
4. ABOUT NORMAL TIME AND
CALENDAR DISPLAY
S2 In normal time mode, the day,
month and day are displayed on
the top part of the display while
the time is displayed on the bot-
tom part.
Press the S2 button to change
between 12-hour and 24-hour
clock format. When the 12-hour
format is chosen, the A or P
indicator will light up to show
the correct time of the day. The
chosen clock format will
apply to the second time zone
also.
5. THE HOURLY CHIME
In normal time mode, press the
S1 button to activate or deactivate
the hourly chime. The CHIME
indicatorwill light up and a short
beep will sound every hour.
To deactivate the function, press
the S1 button again in normal
time mode. The CHIME indicator
will disappear.
6. HOW TO SET THE CURRENT
TIME AND DATE
1. Select the normal time mode
using the S3 button.
2. Hold down the S2 button for
two seconds. The second digits
will blink.
3. Press the S1 button to reset
the second digits to 00. This
will increase the time by one
minute if the original setting is
at 30 seconds or more.
4. Press the S3 button. The min-
ute digits will blink.
5. Use the S1 button to set the
minutes. Press the button once
to increase one, or speed up
the process by holding down
the button.
6. Press the S3 button. The hour
digits will blink.
7. Use the S1 button to set the
hours.
8. Follow the same pattern to
set the day, year, month and
date You can set whatever year
between 2000 to 2099.
9. Confirm settings at any time
by pressing S2. Settings are
automatically saved often being
left idle for two minutes.
7. HOW TO SET THE SECOND
TIME ZONE
When TIME 2 mode is selected,
the second time zone will be
displayed above the real-time.
To set the second time zone:
1. Select the TIME 2 mode using
the S3 button. The TIME 2
indicator will light up.
2. Hold down the S2 button. The
hour digit will blink.
3. Use the S1 button to set the
hours.
4. Press the S2 button to confirm.
Settings are automatically
saved often being left idle for
two minutes.
8. HOW TO SET THE DAILY
ALARMS
There are two daily alarms: You
can activate or deactivate the
alarms individually.
To set the alarm clock,
1. Select the ALARM 1 or ALARM
2 mode using the S3 button.
The alarm clock is displayed
above the normal time.
2. Hold down the S2 button for
two seconds. The minute digits
will blink.
3. Use the S1 button to set the
minutes.
ENGLISH