Tray Label & Label Core Unit; Window Back - Sony Xperia Z3 Compact Working Instructions

Reassembly
Tighten the Screws in the sequence shown in the picture.
Torque spec for the Screw M1.4 (Gold) is 10±2 N.cm.
Torque spec for the Screw M1.2 (Silver) is 6-1 N.cm.
Take new Screws!
Connect the NFC Antenna connector.
Make sure it hooks!
5.5 Tray Label & Label Core
Unit
Attach the Tray Label through the slit of the Cover Rear and
the Front Cover.
5.6

Window Back

Remove the old Adhesive Window Back and all remains of
the Adhesive residue.
Clean the edges of the Window Back carefully with alcohol
before the new Adhesive Window Back is mounted. This
action is done to secure the water resistant of the unit.
1291-4296 Rev 1
© Sony Mobile Communications AB – Company Internal
42(46)