Replacement
4.16 Rubber PL Sensor
Follow the 3.1 – 3.6 Disassembly instructions!
Carry out the Removal as described below.
Prepare a new Rubber PL Sensor.
Carry out the Installation as described below.
Follow the 5.1 – 5.6 Reassembly instructions!
REMOVAL
Remove the Rubber PL Sensor by using a Flex Film
Assembly Tool.
INSTALLATION
Place a new Rubber PL Sensor in the correct position as
shown in the picture.
Press to secure its position.
1273-2279 Rev3
Sony Mobile Communications AB – Company Internal
Working Instruction Repair Instruction Mechanical/
27(50)