Panel Key Power & Adhesive Panel Key Power - Sony Xperia ZR Working Instructions

Replacement
4.35 Panel Key Power &
Adhesive Panel Key Power
Follow the 3.1 and 3.2 Disassembly instructions!
Follow the 4.37 – 4.38 Removal instructions!
Panel Key Power & Adhesive Panel Key
Prepare a new
Power
!
Carry out the Installation as described below!
Follow the 4.37 – 4.38 Reassembly instructions!
Follow the 5.12 and 5.13
REMOVAL
Gently remove the Panel Key Power with your fingers.
Scrap the Panel Key Power and Adhesive Panel Key
Powe, not to be reused!
Remove and clean any remaining adhesive residue found
on Cover Main!
INSTALLATION
Place the Adhesive Panel Key Power at the correct position
according to picture before assemble the Panel Key Power.
Secure its position with your fingers!
1273-7033 Rev 1

Sony Mobile Communications AB – Company Internal
Reassembly
instructions!
Working Instruction (mech)
46(71)