Hob-Based Hood Control - Bosch DWK98PR60I/03 User Manual And Installation Instructions

Hide thumbs

Table Of Contents

Table of Contents

8.2 Resetting the connection

To reset the saved connections to the Wi-Fi and to

▶

Home Connect, press and hold

same time until

goes out.

8.3 Software update

Your appliance's software can be updated using the

software update function, e.g. for the purposes of op-

timisation, troubleshooting or security updates.

To do this, you must be a registered Home Con-

nect user, have installed the app on your mobile device

and be connected to the Home Connect server.

As soon as a software update is available, you will be

informed via the Home Connect app and will be able to

start the software update via the app. Once the update

has been successfully downloaded, you can start in-

stalling it via the Home Connect app if you are in your

home network (Wi-Fi). The Home Connect app informs

you once installation is successful.

Notes

¡ The software update consists of two steps.

– The first step is the download.

– The second step is the installation on your appli-

ance.

¡ You can continue to use your appliance as normal

while updates are downloading. Depending on your

personal settings in the app, software updates can

also be set to download automatically.

¡ Installation takes a few minutes. You cannot use

your appliance during installation.

¡ We recommend that you install security updates as

soon as possible.

9 Hob-based hood control

You can connect your appliance to a suitable hob and,

in this way, control the functions of your appliance via

the hob.

If the hob and the extractor hood are Home Connect-

compatible, connect the appliances in the Home Con-

nect app. To do this, connect the two appliances to

Home Connect and follow the instructions in the app.

and

at the

8.4 Remote diagnostics

Customer Service can use Remote Diagnostics to ac-

cess your appliance if you contact them, have your ap-

pliance connected to the Home Connect server and if

Remote Diagnostics is available in the country in which

you are using the appliance.

Tip: For further information and details about the avail-

ability of Remote Diagnostics in your country, please

visit the service/support section of your local website:

www.home-connect.com.

8.5 Data protection

Please see the information on data protection.

The first time your appliance is registered on a home

network connected to the Internet, your appliance will

transmit the following types of data to the

Home Connect server (initial registration):

¡ Unique appliance identification (consisting of appli-

ance codes as well as the MAC address of the Wi-Fi

communication module installed).

¡ Security certificate of the Wi-Fi communication mod-

ule (to ensure a secure data connection).

¡ The current software and hardware version of your

appliance.

¡ Status of any previous reset to factory settings.

This initial registration prepares the Home Connect

functions for use and is only required when you want to

use the Home Connect functions for the first time.

Note: Please note that the Home Connect functions

can only be utilised with the Home Connect app. In-

formation on data protection can be retrieved in the

Home Connect app.

Notes

¡ Please note the safety precautions in the instruction

manual for your appliance and ensure that they are

also observed when operating the appliance via the