Cleaning And Maintenance - Panasonic PT-LM1U Operating Instructions Manual

Problem
The picture does B The signal format ("TV-SYSTEM") may not be set
not display
correctly.
correctly. B There may be a problem with the video tape or
other signal source.
B A signal which is not compatible with the projector
may be being input.
Picture from B The cable may be too long.
computer does B The external video output for the laptop computer
not appear.
may not be set correctly.
(You may be able to change the external output
settings by pressing the [Fn]+[F3] or [Fn]+[F10]
keys simultaneously. The actual method varies
depending on the type of computer, so refer to the
documentation provided with your computer for
further details.)
B If an RGB INPUT indicator is turned off, the video
signals may not be output from the computer.
54-E
NGLISH
Possible cause

Cleaning and maintenance

Before carrying out cleaning and maintenance, be
Page
sure to disconnect the power cord plug from the
36
wall outlet.
–
Wipe the cabinet with a soft, dry cloth.
If the cabinet is particularly dirty, soak the cloth in water with a small amount
58
of neutral detergent in it, squeeze the cloth very well, and then wipe the
cabinet. After cleaning, wipe the cabinet dry with a dry cloth. If using a
chemically-treated cloth, read the instructions supplied with the cloth before
–
use.
–
Do not wipe the lens with a cloth that is dusty or which produces lint.
If any dust or lint gets onto the lens, such dust or lint will be magnified and
projected onto the screen. Use a blower to clean any dust and lint from the
lens surface, or use a soft cloth to wipe off any dust or lint.
14
E -55
NGLISH