OPERATION
FUSIBLE LINK
If the engine starting motor does not work when the engine starting
switch key is turned to the START position, fusible links (1) and (2)
are suspected of disconnection. In that case, open up the door at
the machine's left rear to check and replace.
Fusible link (2) is taped to the nearby wiring harness. When
carrying out inspection or replacement, check the wiring harness
number.
REMARK
A fusible link refers to the large-sized fuse wiring installed in the
high current flow portion of the circuit to protect electrical
components and wiring from burning, in the same way as an
ordinary fuse.
CONTROLLER
Controller installed.
NOTICE
Do not let water, mud, or juice spill on the controller. This will cause
failures.
If any problem occurs in the controller, do not repair it by yourself.
Please contact your Komatsu distributor for repairs.
TOOL BOX
Store the tools in this box.
When the door at the machine's left rear is opened, the tool box is
to be found inside the compartment.
DETAILED CONTROLS AND GAUGES
3 - 67