Screw specifications
M2 x L3
Go to
https://support.lenovo.com/partslookup
replacement part:
Thermal module
Remove the fingerprint sensor and bracket
Make sure the following FRU (or CRU) has been removed.
"Remove the touchpen" on page 28
"Remove the lower case" on page 29
"Remove the battery pack" on page 30
Step 1.
Disconnect the fingerprint sensor board cable.
Figure 19. Disconnect the cable
Step 2.
Remove one screw and remove the fingerprint sensor bracket.
Number of screws
6
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
39