Inserting And Removing The Sd Memory Card - Panasonic PT-L200U Operating Instructions Manual

Inserting and removing the SD memory card

Inserting the SD
memory card
Insert the SD memory card so that it
is facing the correct way.
# Open the slot cover at the side
of the projector.
$ Insert the SD memory card as
shown in the illustration below.
Insert the SD memory card with
the label side facing upward and
so that the cut-away corner is
inserted first. Push the SD
memory card in as far as it will
go.
NOTE:
B If you try to force the SD memory
card to go in the wrong way, it
may damage the SD memory
card and the card slot.
% Close the slot cover.
42
Removing the SD
memory card
# Open the slot cover.
$ Check that the access indicator
at the upper-left corner of the
card slot is not flashing (the SD
memory card is not being
accessed).
Access lamp
NOTE:
B Always be sure to check that the
access indicator is not flashing
before removing the SD memory
card. If the SD memory card is
removed while the access
indicator is flashing, the data
stored on the SD memory card
may become corrupted.
% Push in the middle of the SD
memory card. (The SD memory
card will protrude slightly.)
& Remove the card.
' Close the slot cover.