Nokia 3110 Classic Service Manual page 12

CMO Operations & Logistics
Training and Vendor Development
Multimedia Creation & Support
7. Unlock the screws in the order shown.
9. Gently, remove the ENGINE MODULE. Avoid damaging the
guide pin of the B-COVER.
11. Use a flat bladed screwdriver to open the FLEX SHIELDING
LID. Do not touch the spring contacts with the tool. Discard the
FLEX SHIELDING LID after removal.
Service Manual 3110c RM-237 / 3109c RM-274
Page 12 (37)
COMPANY CONFIDENTIAL
8. Lift the Engine Module a bit as shown.
10. Take a special care to the spring contacts on the ENGINE
MODULE.
12. Unlock the UI-SHIELD ASSY.
Copyright © 2007 NOKIA Corporation. All rights reserved.
Draft 4.0
MGR
14.May.2007