Selecting The Connection Method - Panasonic PT-F100NTE Network Manual

Panasonic pt-f100nte: network guide
Hide thumbs Also See for PT-F100NTE:
Table of Contents

Advertisement

Selecting the connection method

When the <Network Adapter Selection> window appears, select [Wireless LAN] or [Wired LAN] and click [OK].
When the wired LAN is not connected and there is a usable wireless LAN (Disconnected)
Connects to the wireless LAN. (See page 15)
When the wired LAN is connected and there is usable wireless LAN (Disconnected)
The <Network Adapter Selection> window appears.
Select [Wireless LAN] or [Wired LAN], select the connection destination and click [OK].
[Wireless LAN]: The wireless LAN is used for the connection.
[Wired LAN]:
The wired LAN is used for the connection.
The <Select Access Port> window appears. (See page 18)
The only usable network number is [U (USER)].
When the wired LAN is connected and there are two or more usable wireless LAN
(all connected)
Select [Wireless LAN] or [Wired LAN], select the connection destination and click [OK].
[Wireless LAN]: Changes to the wireless LAN and makes the connection.
The confirmation dialog box appears. Click [Yes].
If [No] is clicked, the connection will stay in its original condition and the <Select Access Port> window
appears. (See page 18)
[Wired LAN]:
The wired LAN is used for the connection.
The <Select Access Port> window appears. (See page 18)
The only usable network number is [U (USER)].
When the wired LAN is not connected and there are two or more usable wireless LAN (all Connected)
Only [Wireless LAN] can be selected. Select the connection destination from the connection destination list and click [OK].
The confirmation dialog box appears. Click [Yes].
If [No] is clicked, the connection stays in its original condition and the <Select Access Port> window appears. (See page 18)
When the wired LAN is not connected and there is one usable wireless LAN (Connected)
Connects to the wireless LAN.
The confirmation dialog box appears. Click [Yes].
If [No] is clicked, the connection stays in its original condition and the <Select Access Port> window appears. (See page 18)
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents