Adjusting The Colour Temperature - Panasonic PT-D7000E Operating Instructions Manual

Adjusting the colour temperature

Adjustment procedure (to be performed while projecting the signals to be adjusted)
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
LANGUAGE
OPTION
TEST PATTERN
SIGNAL LIST
SECURITY
PICTURE
PICTURE MODE
COLOR
TINT
COLOR TEMP.
GAMMA
CONTRAST
BRIGHT
SHARPNESS
NOISE REDUCTION
DYNAMIC IRIS
:MENU SELECT
:CHANGE
WHITE BALANCE
WHITE BALANCE HIGH
WHITE BALANCE LOW
WHITE BALANCE HIGH
R
G
B
Item Operation
Press
R (Red)
Press
Press
G (Green)
Press
Press
B (Blue)
Press
Note
• All colours will not be displayed properly unless adequate adjustment is made.
If the adjustment is not successful, press "STD" (standard) button when the individual adjustment
screen is displayed to restore the factory default setting only for the displayed item.
• The colour temperature cannot be adjusted for the internal test pattern (refer to page 77). Be sure to
project the input signal when adjusting the colour temperature.
• When any setting other than "OFF" has been selected for colour matching, the COLOUR TEMP.
setting is fixed at "USER1"
• "DEFAULT" cannot be selected when the picture mode has been set to "USER"
DYNAMIC
50
30
DEFAULT
2.2
32
32
6
2
1
255
255
255
Deepens red.
button
Weakens red.
button
Deepens green.
button
Weakens green.
button
Deepens blue.
button
Weakens blue.
button
Press the "MENU" button.
The MAIN MENU screen will be displayed
Select "PICTURE" with the
buttons.
Press the "ENTER" button.
The PICTURE screen will be displayed.
Select "COLOR TEMP." with the
buttons.
Select the desired setting from below
with the buttons.
"LOW", "MIDDLE", "HIGH", "DEFAULT", "USER1"
and "USER2"
<To further adjust toward the desired white balance>
Select "USER1" or "USER2" in Step
Press the "ENTER" button.
Select "WHITE BALANCE HIGH" or
"WHITE BALANCE LOW" with the
buttons.
Press "ENTER" button.
The WHITE BALANCE HIGH (LOW) screen will be
displayed.
Select "R", "G" or "B" with the
buttons.
Adjust the level with the
Adjustment
.
buttons.
Remarks
Maximum value 255
Minimum value 0
49