Built-In Installation - Baumatic BW300SS Instruction Manual

o Place the appliance flatly and firmly on a solid base. The
appliance is fitted with adjustable feet, which should be used to
level the appliance.
o Be sure to leave enough space for the opening of the door, to
avoid damage to the appliance or personal injury.
o IMPORTANT: The vent at the base of the appliance is for
ventilation. Nothing should be placed in front of this vent;
otherwise your wine cooler may not operate properly.

Built-in installation

o Your wine cooler can be used as a freestanding or a built in unit.
If you are going to use it as a built in unit, then the dimensions
shown in the diagram above will need to be followed.
o In particular the depth dimension must be observed.
o IMPORTANT: The vent at the base of the appliance is for
ventilation. Nothing should be placed in front of this vent;
otherwise your wine cooler may not operate properly.
o IMPORTANT: When building the appliance into a housing
unit, YOU MUST ensure there is a 100 x 100 mm vent at
the front bottom of the unit and at the bottom rear of the
housing unit.
18