Gigabyte MW53-HP0 User Manual page 69

Parameter
SATA And RST
Configuration(continued)
(Note) This item is configurable when Low Power S0 Idle Capability is set to Enabled.
Description
• SATA Port 0/1/2/3/4/5/6/7
» The category identifies SATA hard drives that are installed in the
computer. System will automatically detect HDD type.
• Port 0/1/2/3/4/5/6/7
» Enable/Disable Port 0/1/2/3/4/5/6/7 device.
» Options available: Enabled, Disabled. Default setting is Enabled.
• Hot Plug (for Port 0/1/2/3/4/5/6/7)
» Enable/Disable HDD Hot-Plug function.
» Options available: Enabled, Disabled. Default setting is Enabled.
• Spin Up Device (for Port 0/1/2/3/4/5/6/7)
» If enabled for any of ports staggered spin up will be performed and
only the drives which have this option enabled will spin up at boot.
Otherwise all drives spin up at boot.
» Options available: Enabled, Disabled. Default setting is Disabled.
Low Power S0 Idle Capability
Š
– Options available: Enabled, Disabled. Default setting is Disabled.
PUIS Enable
(Note)
Š
– Options available: Enabled, Disabled. Default setting is Disabled.
BIOS Setup
- 69 -