Programmable Settings
Base unit ringer volume
Make sure the base unit is not being used.
To set the ringer volume to high (preset), medium, or low, press
VOLUME [<] or [>].
• To increase volume, press VOLUME [>]. To decrease volume, press VOLUME [<].
• To stop ringing, press [STOP].
To turn the ringer off, press and hold VOLUME [<] until 2 beeps sound.
O
• "
" is displayed.
To turn the ringer on, press VOLUME [<] or [>].
• The base unit will ring at low level.
• You can adjust the ringer volume while an outside call is ringing. Press VOLUME
[
]
[
]
or
while the base unit is ringing.
<
>
To turn the ringer off, press and hold VOLUME
O
"
" is displayed.
Ringer Tone
You can select the handset and base unit ringers to use one of 7 ringer patterns for
outside calls. "Tone 1" to "Tone 3" are bell ringer patterns. "Melody 1" to "Melody 4"
are melody patterns. The factory preset is "Tone 1".
• You cannot change the ringer tone for intercom calls.
• If you subscribe to a Distinctive Ring Service (such as IDENTA-RING) from your
telephone company with 2 or 3 consecutive rings, select a bell ringer pattern
(Tone 1 to 3). If you select a melody pattern, you will not be able to distinguish
lines by their ringers.
• If you select one of the melody ringer patterns, the ringer will continue to sound for
several seconds if:
— the caller hangs up before you answer the call, or
— another person answers the call using another phone connected on the same line.
Handset ringer tone
Press [MENU].
1
Scroll to "Ringer setting" by pressing [d]
2
or [B], then press the soft key (Select).
Scroll to "Ringer tone" by pressing [d] or
3
[B], then press the soft key (Select).
18
Base Unit
[
Handset
]
for 2 beeps sound.
<
Ringer setting
Back
K
dB
Ringer tone
Back
K
dB
Select
L
Select
L