SPDIF Selection
• Auto
• PCM
PCM Optical Level
• -12 / -10 / -8 /
-6 / -4 / -2 / 0 (dB)
HDMI1 / 2 / 3 Input
• Digital
• Analogue
Audio Description
• Off
• Auto
Reset Sound Defaults
Main Menu
Picture
Sound
Setup
Item
Input Resolution
Clock
H-pos
V-pos
Clock Phase
Sync
• H & V
• SOG
Reset PC Settings
SPDIF: A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL
AUDIO OUT terminal
[Auto]: Dolby Digital is output as Dolby Digital Bitstream. HE-AAC and
MPEG are output as PCM.
[PCM]: Digital output signal is fixed to PCM.
For Digital TV mode, Video mode (p. 43) or Network video contents
●
(p. 53)
Adjusts the audio level of PCM output from DIGITAL AUDIO OUT
terminal as the initial setting
Normally, PCM sound is larger comparing with the other types of
●
audio track.
Digital TV mode only
●
Selects to fit the input signal (p. 65)
[Digital]: HDMI cable connection
[Analogue]: HDMI-DVI adaptor cable connection
HDMI input mode only
●
Useful for visually-impaired viewers
Set to [Auto] to activate the description sound track if available
The availability of audio description sound track is indicated by [AD] in
●
the information banner (p. 15).
Digital TV mode only
●
Press the OK button to reset settings of the present [Mode], [Balance],
[Headphone Volume] and [Surround] in the Sound Menu to the default
Adjustments / Configurations (alternatives)
Switches to a wide view
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
●
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels,
1,366 × 768 pixels)
Options change depending on signals
●
Set to the minimum level if noise occurs.
Eliminates flicker and distortion
Adjust after Clock adjustment
●
●
Set to the minimum level if noise occurs
PC sync signal type
[H & V]: by the horizontal and vertical signals from your PC
[SOG]: Sync on Green sync from your PC
Press the OK button to reset the PC Setup settings to the default.
Adjusts horizontal position
Adjusts vertical position
27