Table of Contents
Advertisement
Figure 2. Removing the front bezel
Figure 3. Installing the front bezel
3. Complete the replacement. See "Complete the parts replacement" on page 58.
Optical drive
Prerequisite
Before you start, read Appendix A "Important safety information" on page 65 and print the following
instructions.
Replacement procedure
1. Remove the computer cover. See "Computer cover" on page 42.
2. Remove the front bezel. See "Front bezel" on page 42.
3. Disconnect the signal cable and the power cable from the optical drive.
.
Chapter 7
CRU replacement
43
Advertisement
Table of Contents
