AOR The Superior AR820 0 Series Operating Manual page 12

PUSH this key to place the AR8200 into 2VFO mode where you may receive spot frequencies and
'generally monitor activity'. The LCD displays two lines of frequency readout, the upper (larger) being the
current receive frequency. The LCD legend "2VFO" confirms selection with each VFO being identified as
"V-A" and "V-B".
again to toggle between VFO-A "V-A" and VFO-B "V-B".
to initiate VFO search between the two displayed frequency limits set by VFO-A and
VFO-B, the legend "V-SR" confirms selection of VFO SEARCH.
may be configured:-
VFO SCAN
DELAY
LEVEL
VOICE
FREE
AUTOSTORE
DELETE J
QUICK MEMORY
PRESS this key to switch the AR8200 on and off as a toggle. To prevent accidental switch on and off,
the power key is placed between two ridges and has to be held for more than one second for the press to
be registered. The ridges also help location of the power key when operated in areas of low level
lighting.
PUSH this key to activate the band scope,
normal operation.
Note: Priority operation is disabled when the band scope facility is in use.
Traces will be overwritten as the band scope is written from left to right on the LCD. To build up a long
term activity display,
legend "HLD" confirms operation.
The key sequence
PUSH this key to PASS (lockout) memory channels during memory read & scan mode and to PASS
(skip) unwanted frequencies in search mode. Also acts as select ON/OFF/DEFAULT toggle in various
menus.
to access the VFO MODE select menu where the following parameters
ON / OFF (default = OFF)
OFF / HOLD / 0.1s to 9.9s (default = OFF)
OFF / 1 to 255 (default = OFF)
OFF / 1 to 255 (default = OFF)
OFF / 1s to 60s (default = OFF)
ON / OFF (default = OFF)
(deletes the current data from bank J)
OFF / 10s to 990s (default = OFF)
the
to toggle the PEAK HOLD facility on / off, the LCD
recalls a previously saved band scope trace.
, or
Section 1-5-2
key to return to
11