14-8.Wired Remote Controller (Uty-Rlry); 14-9.Wired Remote Controller (Uty-Rnryz*) - Fujitsu AUXG07-18KVLA Design & Technical Manual

14-8. Wired remote controller (UTY-RLRY)
DIP switch
¢ Switch location
¢ Dip switch setting
 SW1: Memory backup setting
Set to "ON" to use batteries for the memory backup.
When batteries are not used, all of settings stored in memory will be deleted if there is a power
failure.
SW1
OFF
ON
14-9. Wired remote controller (UTY-RNRYZ*)
DIP switch
¢ Switch location
¢ Dip switch setting
 SW1: Memory backup setting
Set to "ON" to use batteries for the memory backup.
When batteries are not used, all of settings stored in memory will be deleted if there is a power
failure.
SW1
OFF
ON
14-8. Wired remote controller (UTY-RLRY)
Memory backup setting
Memory backup
Memory backup setting
Memory backup
Front case (back side)
Set the DIP switch to ON
OFF ON
Disable
Enable
Front case (back side)
Set the DIP switch to ON
OFF ON
Disable
Enable
- 300 -
Factory setting
♦
Factory setting
♦
14. Function settings