Table of Contents
Advertisement
If necessary, adjust the pro-
2.
gramme settings → Page 31.
Adjusting the programme set-
tings
Depending on the programme and
programme progress, you can adjust
or activate/deactivate the settings.
Note: Overview of all programme set-
tings:
→ "Buttons", Page 25
Requirement: A programme has
been set.
Adjust the programme settings.
▶
The programme settings are not
saved permanently for the pro-
gramme.
Loading laundry
Notes
¡ Please read the safety information
→ Page 4 to ensure that you use
the appliance safely.
¡ To prevent creasing, take note of
the maximum load for the relevant
programme → Page 22.
Requirement: Prepare and sort the
laundry.
→ "Laundry", Page 27
Open the door.
1.
Ensure that the drum is empty.
2.
Separate the laundry and place it
3.
in the drum.
Note: Ensure that there is no laun-
4.
dry trapped in the door.
Close the door.
Adding detergent and care
product
Note: Please read the safety informa-
tion → Page 4 to ensure that you use
the appliance safely.
Requirement: Find out the optimum
dosage for detergent and care
product. → Page 29
Pull out the detergent drawer.
1.
Pour in detergent.
2.
→ "Detergent drawer", Page 19
If required, add the care product.
3.
Push in the detergent drawer.
4.
Starting the programme
Note: If you want to change the time
until the programme ends, set the
"Ready in" time first.
Press Start / Reload .
▶
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows either the pro-
gramme duration or the "Ready in"
time.
Basic operation en
31
Advertisement
Table of Contents
