Philips 32BDL4051D User Manual page 62

Human sensor(require Philips accessory CRD41 External
Sensor Box)
The Human sensor can detect if people approach the display or not.
The display will turn off backlight if it detects nothing in setting time.
The display will return to backlight on when people approach the
display..
The options are:
•{Off} (Default), {10 Min.}, {20 Min.}, {30 Min.}, {40 Min.}, {50 Min.}, {60
Min.}
Power LED light
Choose to set power indication LED on or off.
Choose {On} for normal use.
Configuration1 reset
Reset all settings in Configuration1 menu to the factory preset values.
Factory reset
Reset all settings in the OSD menus of {Picture}, {Screen}, {Audio}, {PIP},
{Configuration1}, {Configuration2}, and {Advanced option} to the
factory preset values.
Android settings will also reset when factory reset.
Press [ ] or [ ] button to select {Reset}, and press [OK] button to
do the reset.
Factory reset
Cancel
6.2.6. Configuration2 menu
OSD turn off
Configuration 2
OSD H-position
OSD V-position
Advanced option
OSD transparency
Information OSD
Logo
Monitor ID
Heat status
Monitor information
DP version
Windows selection
Configuration 2
Rotation
Language
Advanced option
Configuration2 reset
Reset
45
50
50
off
10 Sec.
On
Action
Action
Action
DP 1.1
Main
Action
English
Action
OSD turn off
Set the period of time the OSD (on-screen display) menu stays on the
screen.
The options are: {0 ~ 120} seconds.
*{0} does not disappear automatically.
OSD H-position
Adjust the horizontal position of the OSD menu.
OSD V-position
Adjust the vertical position of the OSD menu.
OSD Transparency
Adjust OSD transparency.
• {Off} - Transparency off.
• {1-100} - Transparency level 1-100.
Information OSD
Set the period of time the information OSD is displayed on the upper
right corner of the screen. The information OSD will display when input
signal is changed.
The information OSD will remain on the screen with {Off} selection.
The options are: {1 ~ 60} seconds.
Logo
Choose to enable or disable the picture of Logo when turn on your
display.
The options are:
{Off} (Default)
•
• {On}*
• {User}**
** If Logo set to USER.
User logo does NOT support rotation function.
Monitor ID
Set the ID number for controlling the display via the RS232C
connection. Each display must have a unique ID number when multiple
sets of this display are connected. Monitor ID number range is between
1 to 255.
The option are: {Monitor group} / {Tiling matrix} / {Auto ID}
Monitor Id
Monitor Id
Monitor group
Tiling matrix
Auto ID
• {Monitor group}
The options are: {Off} / {1-254}
{Off} – {Monitor group} are not supported.
•
{1-254} – {Monitor group} are supported. The default setting is
•
1.
{Tiling matrix}
•
Tiling matrix number range is between 1 to 15. 1 is default setting.
The {Auto ID} setup function enables setting up {Monitor ID} of
connected machine according to {Tiling matrix} settings.
Example: Tiling matrix sets as 4
51
1
1
1
End