Table of Contents
Advertisement
17.1 Emergency release
unlock door
Required:The drain pump is empty.
→ Page 34
1. ATTENTION!Running water can
lead to material damage.
▶
Do not open the door if water can
be seen behind the glass.
Pull down and release the
emergency release with the aid of a
tool.
aThe door lock is unlocked.
Place the service door and click it into
2.
place.
Close the service door.
3.
18 Transport, on-
hit and drain
18.1 Dismantling the device
Close the tap.
1.
Empty the water inlet hose.
2.
Turn off the device.
3.
→ "Switch off the device",
page 30
Unplug the appliance from the
4.
unplug.
leave the suds
5.
→ "Drain pump
clean Page 34
walk away.
igen",
Transport, storage and disposalNL
Disassemble the hoses.
6.
18.2 Installing transport locks
To avoid transport damage, secure
the device with transport locks before
transport.
Remove the 4 cover caps using a
1.
screwdriver.
Keep the cover caps.
Place the 4 transport locks.
2.
→ "Remove transport locks", page
14
18.3 Restarting the device
For more information, see
▶
→
"Setting up and
connecting", Page 13 and
→ "Start the wash cycle without
laundry", page 20 .
47
Advertisement
Table of Contents
