Table of Contents
Advertisement
Pull the tab on the glassZone up
2.
and forwards
Set the slider to ON.
3.
Clean under running water.
4.
Place the glassZone in the top
5.
basket and lock in position
Check that the mounts are in the
correct position.
a The glassZone audibly clicks into
position
.
Push in the top basket.
6.
.
.
first time
9 Before using for the
first time
first time
9.1 Performing the initial con-
figuration
On initial start-up or after a reset to
the factory settings, you will need to
make settings.
Tip: Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
Home Connect app.
Requirement: The appliance has
been installed and connected.
→ Page 11
Add special salt. → Page 25
1.
Add rinse aid. → Page 26
2.
Switch on the appliance.
3.
→ Page 31
Setting the water softening system.
4.
→ Page 24
Set the amount of rinse aid to be
5.
dispensed. → Page 26
Add detergent → Page 27.
6.
Start the Programme with the
7.
highest cleaning temperature
without tableware.
To remove any marks from water
or other residues, we recommend
you operate the appliance without
tableware before using it for the
first time.
Tip: You can change these settings
and other Basic settings → Page 34
at any time.
first time en
23
Advertisement
Table of Contents
