Panasonic DMP-BDT225 Owner's Manual page 30

24p Output [BDT230] [BDT225]
When this unit is connected to a TV supporting
1080/24p output, movies and other material
recorded at 24p* are output at 24p.
1
≥ When playing DVD-Video, set to "On" and
then set "24p" in "Video Settings" (
"On".
≥ When BD-Video/DVD-Video images other
than 24p are played, images are output at
60p.
HDMI Color Mode
This setting is for selecting color-space
conversion of the image signal.
Deep Color Output
This setting is for selecting whether to use Deep
Color output when a TV that supports Deep
Color is connected.
Contents Type Flag
Depending on the playback content, the TV will
output adjusting to the optimal method when a
TV that supports this function is connected.
HDMI(SUB) Output Mode [BDT330]
Set to output the video from the HDMI AV OUT
SUB terminal or not.
A progressive image recorded at a rate of 24 frames per
*1
second (motion-picture film). Many BD-Video movie
contents are recorded in 24 frames/second in accordance
with the film materials.
A high resolution image/display technology of
*2
approximately 4000 (width)
30
VQT4V26
28) to
k 2000 (height) pixels.
Audio
∫ Dialog Enhancer
∫ Dynamic Range Compression
You can listen at low volumes but still hear dialog
clearly.
(Dolby Digital, Dolby Digital Plus and Dolby
TrueHD only)
≥ "Auto" is effective only when playing Dolby
TrueHD.
∫ Digital Audio Output
Press [OK] to show the following settings:
Dolby D/Dolby D +/Dolby TrueHD
DTS/DTS-HD
Select the audio signal to output.
≥ Select "PCM", when the connected equipment
cannot decode the respective audio format. This
unit decodes the audio format and transmits to the
connected equipment.
≥ Not making the proper settings may result in noise.
BD-Video Secondary Audio
Select whether or not to mix the primary and
secondary audio (including the button click sound).
If "Off" is selected, the unit outputs the primary
audio only.
HDMI Audio Output
This setting selects whether or not to output
audio from HDMI.
≥ Select "Off" when the TV is connected to this
unit via HDMI AV OUT terminal, and this unit
is also connected to other devices, such as
an amplifier/receiver via an OPTICAL
terminal.
( 28)