Detergent; Essentials Of The Operation; Switching On The Device; Set Program - Siemens WM14N2M3FG User Manual And Installation Instructions

Table of Contents

Advertisement

¡Wash laundry with stains immediately
sen
¡Laundry with dried stains
pre-treat and wash several times
¡Laundry folded in
do the drum
12 Detergent and fabric
means of care
Information from the manufacturer about
use and dosage can be found on the
packaging.
Comments
¡when using liquid detergent
parts only use self-flowing liquid
detergents ¡various liquid
detergents
do not mix
¡detergent and fabric softener
to blend
¡No too long stored and strong in-
using thickened products. ¡do not
use solvent-containing
the, corrosive or gaseous agents
¡Use dyes in moderation,
salt can affect stainless steel
¡no bleach in the appliance
use ready
1 3 The Operation in es-
sentie

13.1 Switching on the device

Required:The device is set up and
connected correctly.
→ "Setup and connection",
page 13
Set the program selector to a
programme.
Detergent and fabric care productNL

13.2 Set program

Turn the program selector and set
1.
it to the desired programme.
→ "Programs", page 24
Adjust the program settings if
2.
desired.
→ "Adjust program settings", page
29

13.3 Adjust program settings

Required:A program is set.
→ "Set program", page 29
Adjust the program settings.
→ "Buttons", page 23
Remark:The program settings are not
permanently saved for the program.
13.4 Filling the drum with
laundry
Remark:To avoid creasing, please
observe the maximum load of the
programs.
→ "Programs", page 24
Requirements
¡The laundry is prepared and
sorted.
→ "Laundry", Page 28
¡The drum is empty.
Open the door.
1.
Place the laundry in the drum.
2.
Close the door.
3.
Make sure that no small items of
laundry are caught in the door.
29

Advertisement

Table of Contents
loading

Table of Contents