Technics SL-G700M Operating Instructions Manual page 102

■
MQA Full Decoder
Digital output
(COAX/OPT)
Analogue output
(BALANCED/
UNBALANCED)
■
MQA is not supported
Digital output
(COAX/OPT)
Analogue output
(BALANCED/
UNBALANCED)
• It is recommended that "MQA Decoding" is set to
"On" when the connected digital output device
supports MQA rendering function or does not
support MQA function.
The digital signal outputs as MQA decoded signal
(MQA Core) when "MQA Decoding" is set to "On"
(The factory default is "On".). And the connected
device renders the signal when the device supports
MQA rendering function.
• It is recommended that "MQA Decoding" is set to
"Off" when the connected digital output device
provides MQA full decoding. The digital signal
outputs as MQA bitstream without decoding
when "MQA Decoding" is set to "Off", and the
MQA full decoding device decodes all MQA
signals.
• The MQA decoded signal (MQA Core) which is
input to this unit, can be rendered and output
as analogue signal when "MQA Decoding" is
set to "On" and "Digital Output" is set to "Off".
(Maximum upsampling limit is 192 kHz.)
"Digital Output" is set to
"On".
"MQA Decoding" is set to
"Off".
"Digital Output" is set to
"Off".
"MQA Decoding" is set to
"On".
"Digital Output" is set to
"On".
"MQA Decoding" is set to
"On".
"Digital Output" is set to
"Off".
"MQA Decoding" is set to
"On".
102