Panasonic Lumix DMC-LS5 Operating Instructions Manual page 70

Computer, printer
Cannot send pictures to computer.
●
Not connected correctly (→55).
●
Check whether computer has recognised camera.
●
Select [PC] when connecting the camera to your computer. (→55)
Computer does not recognise card (only reads built-in memory).
●
Disconnect USB connection cable and reconnect with card in place.
The card is not recognised by the computer.
(You are using an SDXC Memory Card.)
●
Make sure your computer supports SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
●
When you insert a card, a message will be displayed requesting you to format the card,
but do not format it.
●
If [Access] remains displayed on the LCD monitor, turn off the camera and then
disconnect the USB cable.
Cannot print when connecting to printer.
●
Printer is not compatible with PictBridge.
●
Set [USB Mode] to [PictBridge (PTP)]. (→58)
Cannot print the date.
●
Make date printing settings before printing.
→ With supplied software: Select "with dates" within print settings.
Edges cut off pictures when printing.
●
Release any trimming or edgeless printing settings on printer before printing.
(Consult printer operating manual.)
●
The pictures were recorded in
→ If printing in shop, check if 16:9 sizes can be printed.
aspect ratio.
- 70 -
Q&A
Troubleshooting
VQT3T39