Panasonic Lumix DMC-FX10 Operating Instructions Manual page 27

∫ Picture size and maximum zoom
magnification
(±: Available, —: Not available)
¢ DMC-FX12
Aspect
Picture size
ratio
(P61)
(P60)
/ (7M)
(6M)
(5.5M)
(5M EZ)
(3M EZ)
(2M EZ)
(1M EZ)
/
(0.3M EZ)
/
(2.5M EZ)
(2M EZ)
¢ DMC-FX10
Aspect
Picture size
ratio
(P61)
(P60)
/ (6M)
(5M)
(4.5M)
(3M EZ)
(2M EZ)
(1M EZ)
/
(0.3M EZ)
/
(2.5M EZ)
(2M EZ)
Maximum
Extended
zoom
optical
magnification
zoom
(Tele)
3k —
±
3.6k
±
4.5k
Maximum
Extended
zoom
optical
magnification
zoom
(Tele)
k
3 —
±
4.1k
∫ Extended optical zoom mechanism
When you set the picture size to [
(3M EZ) (3 million pixels), the 7M (7 million
pixels) (DMC-FX12)/ 6M (6 million pixels)
(DMC-FX10) CCD area is cropped to the
center 3M (3 million pixels) area, allowing a
picture with a higher zoom effect.
• The optical zoom is set to Wide (1k)
when the camera is turned on.
• If you use the zoom function after focusing
on the subject, focus on the subject again.
• The lens barrel (P9) extends or retracts
according to the zoom position. Take care
not to interrupt the motion of the lens
barrel while the zoom lever is rotated.
• In motion picture mode [
magnification is fixed to the value set at
the start of recording.
• "EZ" is an abbreviation of
"Extended optical Zoom".
• You can further enhance the zoom
magnification with the extended optical
zoom without worrying about further
picture distortion.
• If you set a picture size that activates the
extended optical zoom, the extended
optical zoom icon [
screen when you use the zoom function.
• The zoom will stop moving for an instant
near [W] (1k) when the extended optical
zoom is used. This is not a malfunction.
• The indicated zoom magnification is an
approximation.
• In motion picture mode [
[HIGH SENS.] in scene mode, the
extended optical zoom does not work.
Basic
]
], the zoom
] is displayed on the
] and
27
VQT1C14