Fisher-Price BLR87 Manual page 4

Support Bar
Frame Assembly
4
IMPORTANT! This step must be completed before attaching
the seat to the frame assembly.
• "Snap" the support bar onto the pegs on the top of the
frame assembly.
9
• Insert two M4,5 x 18mm washer head screws into the holes
on the bottom of the seat, as shown.
• Tighten the screws.
5
• "Snap" the tray handles into the holes in the seat.
10
• "Snap" the bear toy into the slot in the seat.
4
Seat
Tray