Location Of Plates, Table To Enter Serial No. And Distributor; Machine Serial No. Plate Position - Komatsu WA250-3 Operation & Maintenance Manual

4. LOCATION OF PLATES, TABLE TO ENTER SERIAL NO. AND
DISTRIBUTOR

4.1 MACHINE SERIAL NO. PLATE POSITION

(A) Position of plate
On the center right of the front frame.
(B) Position of stamp
This is stamped on the center of the front frame on the right hand side of
the machine.
4.2 ENGINE SERIAL NO. PLATE POSITION
Position of plate
As viewed from the right hand side of the machine.
4.3 TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
Machine serial No.:
Engine serial No.:
Distributor name:
Address:
Service personnel for your machine:
REMARKS
Phone:
INTRODUCTION
0-5