Setting Up A Phone Connection - Palm Zire 72 Getting Started

CHAPTER 12
Tip
If you receive a message
that your phone is not
ready to accept a
connection, check to
make sure that your
phone is prepared to
make a Bluetooth
connection. See the
instructions included with
your phone.
Zire™ 72 Handheld
Connecting Wirelessly to Other Devices

Setting up a phone connection

[ ! ]
IMPORTANT
To set up a phone connection, you must have a GSM or GPRS mobile phone
enabled with data services.
0O
1
Go to the Home
2
Select Setup Devices, select Phone Setup, select Setup Connection, and then
select Next.
3
Select the phone you want to connect to:
a. Tap the Manufacturer and Model pick lists, select the correct entries for your
phone, and then select Next.
b. The Connection Setup screen displays all Bluetooth phones within range.
Select the phone you want, select Next, and then select Next again.
c. If the phone you want does not appear on the Connection Setup screen,
select Find More. If the phone still does not appear, run the Phone Link
Updater application (Windows only) and then go to step 4.
NOTE
For Mac computers, if the phone does not appear on the list, go to
www.palmone.com/us/support/downloads/phonelink.html to download the
driver for your phone, and then go to step 4.
Continued
screen and select Bluetooth .
83