Beaming Problems; Recharging Problems - 3Com Palm V Handbook

Beaming problems

Problem
I cannot beam data to
another Palm
Computing platform
handheld.
When someone
beams data to my
organizer, I get a
message telling me it
is out of memory.

Recharging problems

Problem
When I place my
Palm V organizer in
the cradle, the cradle
light does not go on.
Page 204
Solution
Confirm that your organizer and the
other Palm V organizer are between ten
centimeters (approximately 4") and one
meter (approximately 39") apart, and
that the path between the two
handhelds is clear of obstacles. Beaming
distance to other Palm Computing
platform handhelds may be different.
Move your organizer closer to the
receiving handheld.
Your organizer requires at least twice
the amount of memory available as the
data you are receiving. For example, if
you are receiving a 30K application, you
must have at least 60K free.
Perform a soft reset. See "Performing a
soft reset" in Appendix A for more
information.
Solution
Confirm that your organizer is well
seated in the cradle.
Confirm that your recharger cable is
properly connected to the back of the
cradle's serial (COM) port connector
that plugs into your computer.
Confirm that your recharger is plugged
into an AC outlet that has power.
Frequently Asked Questions