Installing Palm Desktop Software On A Windows Computer - Palm m100 Series Getting Started

Installing Palm Desktop software on a
Windows computer
1. Turn on your computer.
2. Exit any open programs, including those that run automatically at
startup (such as Microsoft Office) and virus-scanning software.
3. Insert the Palm Desktop CD-ROM into the CD-ROM drive.
Note:
If installation does not begin, click the Windows Start
button, choose Run, enter D:\autorun.exe, and then click
OK. If necessary, replace D: with the drive letter assigned
to your CD-ROM drive.
4. Follow the onscreen instructions to complete the installation.
During installation you may be asked to connect your handheld to
the HotSync cradle/cable.
Important: For users outside the United States, choose the same
language for Palm Desktop software and your handheld.
Choosing a language that does not match your handheld
is not recommended or supported, and may result in data
loss. If you need to reselect a language for Palm Desktop
software, repeat the installation process and select the
appropriate language.
Shown with a
HotSync cradle.
Some models use
a cable in place
of the cradle.
For information about how to use Palm Desktop software, refer to the
online Help and the Quick Tour in Palm Desktop software.
Page 6 Get Started