3Com III Handbook page 25

Note: You can also open the Set Time dialog (to select a start
time) by making sure no event is selected, and then
writing a number on the number side of the Graffiti
writing area.
4. Tap the time columns on the right side of the Set Time dialog to set
the Start Time.
Start Time
highlighted
5. Tap the End Time box, and then tap the time columns to set the
End Time.
6. Tap the OK button to confirm your selection and close the Set Time
dialog.
7. Tap a blank area of the screen to de-select the event. A vertical line
appears next to the time, indicating the duration of the event.
Chapter 3
Tap the
time of an
event
Tap to scroll to
earlier hours
Tap to change
hours
Tap to change
minutes
Tap to scroll to
later hours
Page 19