System Overview; Front Panel - Bosch PAVIRO PVA-2P500 User Manual

PAVIRO Amplifier
3

System overview

3.1

Front panel

Number Symbol
1
2
3
Bosch Security Systems, B.V.
Element Description
Signal clip Indicates the signal level of the amplifier channel:
indicator light –
–
Combined fault This indicator lights up yellow when a fault has
warning indicator occurred in the device. The types of faults to be
light displayed via this indicator are configured in IRIS-
Net. Please refer to section Operation, page 22 .
Recessed button The button is protected to prevent it from being
pressed accidentally. Use a pointed object (such as
a ballpoint pen) to press the button.
This button has the following functions if the CAN
address of the device is not set to 00:
–
–
–
This button has the following functions if the CAN
address of the device is set to 00 (stand-alone
mode):
User manual
Green = The output signal is 18 dB below clip
level
Yellow = The output signal is clipping or the
integrated limiter of the amplifier is limiting the
output signal.
Find function: If the find function of the device
is activated, press this button to deactivate the
indicators.
Displaying the CAN baud rate: Press this button
for at least one second. Please refer to section
Displaying the CAN baud rate, page 21 .
LED test: Press this button for at least three
seconds to activate the LED test. All indicators
at the front panel light up as long as the button
is pressed.
System overview | en 7
2023-03 | 08 | F01U306898